R&D

홈

R&D

Equipment

TACK Measurement (Ink O Meter)

This is Tack and Misting measuring device which are basic properties of ink.
It can be measured at 150rpm, 400rpm, 800rpm, 1200rpm, 2000rpm.
Printability tester

It is a printing device similar to RI printer and can print two colors simultaneously and can print at the same temperature.
Printability tester

It is a printing device that prints Ink at 1 μm thickness and measures the density of printed surface.
Automatic Printing Equipment

It is easier to operate than existing RI tinting machine with automatic printing machine, mainly used for UV ink color.
Printability Tester (RI Printer)

Ink printing device, which can measure the density, gloss, SET-TIME after printing and on-press stability tests are also available
Density and Color measurement (Densitometer)

A device for measuring the density and color coordinates of a printed matter
Emulsification Tester

Ink and water are mixed in 1: 1 and forced stirring to calculate the water content of the ink including water In order to prevent various problems that may occur due to inadequate balance between ink and water during printing, the emulsion rate is checked during production.
Drying Time tester (Open time tester)

Measurement of surface drying time of sheetfed ink.
Spread O Meter

It is a device to measure flow among basic physical properties.
RUB RESISTANCE TESTER

A device to measure the rub resistance of the printed surface after printing.
Gloss Meter

A device to measure the gloss after printing.
Paper Drying time tester

A device for measuring paper drying after printing with RI Printer.
Electrical Conductivity meter

Equipment to measure the electrical conductivity of emulsified water and the pH of damp water after Duke emulsification.
It is applicable to not only ink but also pigment experiment, so it is easy to analyze quality.
Molecular weight measuring equipment

Molecular weight measurement and quality control of hard resin and varnish produced by our company with polymer molecular mass measurement device such as synthetic resin and varnish. Use for resin, varnish analysis.
Laray viscosity tester

A device for measuring the viscosity, which is the basic property of an ink.
Viscoelasticity can be measured by measuring the viscosity and strain rate using two kinds of weights.
Visco-elasticity tester

Use to measure viscoelastic properties of Ink and Varnish.
Acid value measurement tester

Resin and varnish are measured automatically by acid value measuring device and the result is calculated.
Emulsification tester

Calculate the water content of ink containing water by forcing agitation while adding water to the ink. It is possible to check the process of ink emulsification by graph and it is used for ink design and inspection.
Flushing equipment

Flushing machine for Lab. can produce 200 ~ 1000g flushing.