Products
Sheetfed Ink
Sheetfed Offset process printing ink
| Outline | Features |
|---|---|
| EC Sheetfed ink is that shows excellent printing effect even on middle quality paper and low weight printing paper which is without surface coating. Affordable, economical inks for easy color selection. In line with high-speed printing, we are making efforts to develop resins and develop pigments. It is an ink that can expect excellent printing effect by wide water window and accurate color reproduction. |
|
| 0(bad) - 10(good) | 0 5 10 |
|---|---|
| Color density | 7 |
| Ink Transfer | 8 |
| Gloss | 8 |
| Set | 8 |
| Rub Resistance | 7 |
| Anti-Misting | 8 |
| Lithographic performance | 7 |
| Milleage | 8 |
| Product name | Color | Type | Features | Packing |
|---|---|---|---|---|
| EC | YELLOW |
H type N type S type |
Uncoated Paper Sheet-fed Offset |
1kg tin 12 cans in a box |
| MAGENTA | ||||
| CYAN | ||||
| BLACK |
H Hard N Normal S Soft
Scroll right to see more tables.
RESISTANCE
| Lightfastness | Alcohol resistance | Alkaline resistance | Foil Lamination Ability | UV Varnish Ability | Aqueous Coating Ability | |
|---|---|---|---|---|---|---|
| YELLOW | 5 | + | + | + | + | + |
| MAGENTA | 5 | + | - | + | + | - |
| CYAN | 8 | + | + | + | + | + |
| BLACK | 8 | + | + | + | + | + |
Scroll right to see more tables.
STORAGE AND PACKING
Only store the ink in a specified place at ambient temperature – ideally the temperature range should be 18 -25 ‘C.
1kg vacuum tin / 12 cans in a box
2kg catridge / 6 cans in a box
2.5kg vacuum tin / 4 cans in a box
200kg barrels
SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS
KMI inks are formulated based on EU regulations, EU REACH and for detailed information, please refer to recent GHS MSDS.
This data sheet is for information and reference when using KMI inks. It is correct to the best of KMI’s knowledge. No liability for any errors, facts or opinions is accepted. Customers must satisfy themselves as to the suitability of this product for their application. During application, performance of the product can be affected by various factors which are beyond the control of KMI, so it is highly recommended that a test print is made before committing to a production run. The information contained herein may be modified without prior notice.
